Power Pros Forum
https://www.mlbppworld.com/

My latest video on YouTube
https://www.mlbppworld.com/viewtopic.php?f=1&t=1398		 Page 1 of 1
Author:  randyjohnson51 [ Tue Sep 09, 2008 7:03 pm ]
Post subject:  My latest video on YouTube
Here's the link to my newest YouTube video.

http://www.youtube.com/watch?v=SxVnKU0DdzQ
Author:  Longball714 [ Tue Sep 09, 2008 7:09 pm ]
Post subject:  Re: My latest video on YouTube
Okaaaaaaaaaaaaaaaaaaaaay... :roll:
Author:  randyjohnson51 [ Tue Sep 09, 2008 7:15 pm ]
Post subject:  Re: My latest video on YouTube
I made it using PowerPoint 2000 and Windows MovieMaker! :lol: You can pretty much ask me almost anything about computers. :lol: Yeah, pretty good for a very young guy.
Author:  cooldude1045 [ Tue Sep 09, 2008 7:27 pm ]
Post subject:  Re: My latest video on YouTube
Did it have any audio?
Author:  SmilingFaces96 [ Tue Sep 09, 2008 7:37 pm ]
Post subject:  Re: My latest video on YouTube
randyjohnson51 wrote:
I made it using PowerPoint 2000 and Windows MovieMaker! :lol: You can pretty much ask me almost anything about computers. :lol: Yeah, pretty good for a very young guy.


I am planning on buying some memory for my computer and I came across the following:

CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

But it has a CAS Latency of 5. This number seems a bit high to me, do you think I should look for something with a smaller latency?
Author:  randyjohnson51 [ Tue Sep 09, 2008 8:22 pm ]
Post subject:  Re: My latest video on YouTube
SmilingFaces96 wrote:
randyjohnson51 wrote:
I made it using PowerPoint 2000 and Windows MovieMaker! :lol: You can pretty much ask me almost anything about computers. :lol: Yeah, pretty good for a very young guy.


I am planning on buying some memory for my computer and I came across the following:

CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

But it has a CAS Latency of 5. This number seems a bit high to me, do you think I should look for something with a smaller latency?


hmm...kind of the million dollar question to me. umm...see how it goes with 5 first. if it doesn't work out, see if you can get a warranty. I just pretty much know the basics of Graphic Design.
Author:  BBiship2 [ Tue Sep 09, 2008 8:28 pm ]
Post subject:  Re: My latest video on YouTube
that wasn't really a joke...
Author:  Paco [ Tue Sep 09, 2008 8:30 pm ]
Post subject:  Re: My latest video on YouTube
That was... incredibly boring, I thought it would have some entertainment, or a good joke.. but meh.. :roll:
Author:  Timmy [ Tue Sep 09, 2008 8:54 pm ]
Post subject:  Re: My latest video on YouTube
Give me back 1 minute and 10 seconds of my life back.
Author:  SmilingFaces96 [ Tue Sep 09, 2008 10:55 pm ]
Post subject:  Re: My latest video on YouTube
Come on guys, you are being a little harsh. How about some constructive criticism?

I would say
  1. It needs work around the topic. Being poor is not something you generally make fun of in life, unless you are poor (in which you can talk about eating 'Mama Burgers' while your buddy's get McDonalds). Most middle class income people shop at the dollar store; therefore, this topic would come off being offensive and not funny to most people.
  2. It is a good amateur graphics design video especially for someone of your age. You did a great job on the concept of creating the video. Got all the key elements. Keep up the hard work and someday maybe you could own your own businees.

Also, I appologize about the blatant stupid Memory question above. I didn't really think you could answer it, but you were bragging about knowing just about anything about computers. Plus, you blasted me on my Success Mode Events post, so I thought you had it coming. I think you really meant to say that you pretty much know everything about application software related to video graphic design.

Again, keep up the good work and keep the films coming. Next time, choose a better topic. Maybe ask your parents if something is funny first. They do know a lot about life and people!!!!!
Author:  DarkShade [ Wed Sep 10, 2008 10:54 am ]
Post subject:  Re: My latest video on YouTube
SmilingFaces96 wrote:
I am planning on buying some memory for my computer and I came across the following:

CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

But it has a CAS Latency of 5. This number seems a bit high to me, do you think I should look for something with a smaller latency?


CAS latency of 5 for DDR2 is pretty good actually, normally it's around 7. It's more important to make sure your FSB speeds match (800Mhz, 1066MHz, etc.) than your CAS latency, if you were looking at which specs take priority.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/